IVIGO Digital Convector Error Codes
| dE | Tilt error |
| When you see the dE error code, ensure that the heater is in a vertical position. The heater should never be operated horizontally. | |
| PE | Plug overheating error |
| 1. When you see PE error code, check the plug and cable of the heater, then it should be plugged out and allow to cool. | |
| 2. If the heater gives the same error when it is operated again, contact your authorized dealer. If it gives this error after a short period of operation, it should be checked and repaired. | |
| 3. If there is no problem in the plug or electrical system and if the problem continues with your heater, contact your authorized dealer. | |
| CE | Processor overtemperature error |
| 1. When you see the CE error code, turn off the heater and allow it to cool. | |
| 2. If it gives the same error when you operate it again, contact your authorized dealer. | |
IVIGO Digital Convector Display Codes
| L0 | Child lock enabled |
| UL | Child lock disabled |
| C | test mode alarm or entry to Exclusive Keylocker presentation mode alarm |
| 2P | Test mode |
| E | Entry to Exclusive Keylocker deleting mode alarm |
| A | Entry to Ntc (ambient temperature) calibration mode alarm |
| L | Entry to Ldr calibration mode alarm |
IVIGO Professional Convector Error Codes
| tILt | Tilting sensor error Tilt error |
| 1. When you see the tILt error code, ensure that the heater is in a vertical position. The heater should never be operated horizontally. | |
| PLu9 | Plug overheating error |
| 1. When you see PLu9 error code, check the plug and cable of the heater, then it should be plugged out and allow to cool. | |
| 2. If the heater gives the same error when it is operated again, contact your authorized dealer. If it gives this error after a short period of operation, it should be checked and repaired. | |
| 3. If there is no problem in the plug or electrical system and if the problem continues with your heater, contact your authorized dealer. | |
| CEr | Processor overtemperature error |
| 1. When you see the CEr error code, turn off the heater and allow it to cool. | |
| 2. If it gives the same error when you operate it again, contact your authorized dealer. | |
IVIGO Professional Convector Display Codes
| SLEP | Motion detection active |
| 0PEn | Open window detection |
| AnFr | Anti-freeze is working |
| xx 0n | xx hr time-delay turning on active |
| xx 0F | xx hr time-delay turning off active |
| 0FF | heater is turned off |
| 0FFA | heater is turned off /anti-freeze property is on |
| L0 | Child lock enabled |
| UnL0 | Child lock disabled |
| C0dE | test mode alarm or entry to Exclusive Keylocker presentation mode alarm |
| CC0d | Entry to Exclusive Keylocker deleting mode alarm |
| CLr | Restore factory settings |
| CntC | Entry to Ntc (ambient temperature) calibration mode alarm |
| CLdr | Entry to Ldr calibration mode alarm |
| Sxxx | Motion detection timeout period (minutes) |
| S0FF | Motion detection disabled |
| PtyP | Program Settings (daily/weekly) |
| tSEt | Setting Time and Day |
| hSEt | Weekly Program Setting |
| ASEt | Adaptive Start Parameters |
| uEr | oftware Version Monitoring |
IVIGO Digital Heater with Fan Error Codes
| dE | Tilt error |
| When you see the dE error code, ensure that the heater is in a vertical position. The heater should never be operated horizontally. | |
| PE | Plug overheating error |
| 1. When you see PE error code, check the plug and cable of the heater, then it should be plugged out and allow to cool. | |
| 2. If the heater gives the same error when it is operated again, contact your authorized dealer. If it gives this error after a short period of operation, it should be checked and repaired. | |
| 3. If there is no problem in the plug or electrical system and if the problem continues with your heater, contact your authorized dealer. | |
| CE | Processor overtemperature error |
| 1. When you see the CE error code, turn off the heater and allow it to cool. | |
| 2. If it gives the same error when you operate it again, contact your authorized dealer. | |
| UE | Voltage error |
| 1. When you see the UE error code, turn off the heater, take precautions for low voltage and use your heater after the voltage is corrected. | |
| 2. If it gives the same error despite all the precautions and normal voltage values, contact us. | |
| F1 | Obstruction error at the fan inlet or outlet channel |
| 1. When you see the F1 error code, check whether the front and back sides of the heater lean at the wall or whether there is something covering the heater. | |
| 2. If this is the situation, correct this. Turn off the heater and allow it to cool. If the error continues despite this, contact us. | |
| F2 | Fan fault error |
| 1. When you see the F2 error code, check whether an object has escaped into the area where the fan is located. | |
| 2. At first, remove the object from the fan. During the removal of the object, “the heater should not be plugged in”. If the error code continues to be shown although there is no object inside or the object inside is removed, contact us. | |
IVIGO Digital Heater with Fan Display Codes
| L0 | Child lock enabled |
| UL | Child lock disabled |
| C | test mode alarm or entry to Exclusive Keylocker presentation mode alarm |
| 2P | Test mode |
| E | Entry to Exclusive Keylocker deleting mode alarm |
| A | Entry to Ntc (ambient temperature) calibration mode alarm |
| L | Entry to Ldr calibration mode alarm |
IVIGO Towel Heater Error Code
| Red led blink | NTC broken |
| When you see this error code, turn off the heater and allow it to cool. If it gives the same error when you operate it again, contact your authorized dealer. | |
IVIGO Professional Towel Heater Error Codes
| Power led 1 and 4 blink | NTC broken or short circuit error |
| When you see this error code, turn off the heater and allow it to cool. If it gives the same error when you operate it again, contact your authorized dealer. | |
| ON/OFF led blink | Processor or heater overtemperature error |
| Öncelikle ısıtıcıyı kapatıp soğumasını sağlayın. Tekrar çalıştırdığınızda yine aynı hatayı veriyorsa yetkili satıcınızla veya bizimle iletişime geçin | |
IVIGO Foot Heater Error Codes
| Minimum led blink | NTC broken or short circuit error |
| Öncelikle ısıtıcıyı kapatıp soğumasını sağlayın. Tekrar çalıştırdığınızda yine aynı hatayı veriyorsa yetkili satıcınızla veya bizimle iletişime geçin | |
| Medium led blink | Motion detection error |
| When you see this error code, turn off the heater and allow it to cool. If it gives the same error when you operate it again, contact your authorized dealer. | |
| Turbo led blink | Resistance broken error |
| When you see this error code, turn off the heater and allow it to cool. If it gives the same error when you operate it again, contact your authorized dealer. | |
| Audible warning | NTC overtemperature error |
| When you see this error code, turn off the heater and allow it to cool. If it gives the same error when you operate it again, contact your authorized dealer. | |
| Any led blink | Frequency capture error |
| When you see this error code, turn off the heater and allow it to cool. If it gives the same error when you operate it again, contact your authorized dealer. | |
IVIGO Foot Heater With Fan Error Codes
| 1. led blink | NTC broken or short circuit error |
| When you see this error code, turn off the heater and allow it to cool. If it gives the same error when you operate it again, contact your authorized dealer. | |
| 2. led blink | Motion detection error |
| When you see this error code, turn off the heater and allow it to cool. If it gives the same error when you operate it again, contact your authorized dealer. | |
| 3. led blink | Resistance broken error |
| When you see this error code, turn off the heater and allow it to cool. If it gives the same error when you operate it again, contact your authorized dealer. | |
| Audible warning | NTC overtemperature error |
| When you see this error code, turn off the heater and allow it to cool. If it gives the same error when you operate it again, contact your authorized dealer. | |
Solaris Digital Convector Error Codes
| dE | Tilt error |
| When you see the dE error code, ensure that the heater is in a vertical position. The heater should never be operated horizontally. | |
| PE | Plug overheating error |
| 1. When you see PE error code, check the plug and cable of the heater, then it should be plugged out and allow to cool. | |
| 2. If the heater gives the same error when it is operated again, contact your authorized dealer. If it gives this error after a short period of operation, it should be checked and repaired. | |
| 3. If there is no problem in the plug or electrical system and if the problem continues with your heater, contact your authorized dealer. | |
| CE | Processor overtemperature error |
| 1. When you see the CE error code, turn off the heater and allow it to cool. | |
| 2. If it gives the same error when you operate it again, contact your authorized dealer. | |
Solaris Digital Convector Display Codes
| L0 | Child lock enabled |
| UL | Child lock disabled |
| C | test mode alarm or entry to Exclusive Keylocker presentation mode alarm |
| 2P | Test mode |
| E | Entry to Exclusive Keylocker deleting mode alarm |
| A | Entry to Ntc (ambient temperature) calibration mode alarm |
| L | Entry to Ldr calibration mode alarm |
Solaris Professional Convector Error Codes
| tILt | Tilt error |
| 1. When you see the tILt error code, ensure that the heater is in a vertical position. The heater should never be operated horizontally. | |
| Err | Plug overheating error |
| 1. When you see PLu9 error code, check the plug and cable of the heater, then it should be plugged out and allow to cool. | |
| 2. If the heater gives the same error when it is operated again, contact your authorized dealer. If it gives this error after a short period of operation, it should be checked and repaired. | |
| 3. If there is no problem in the plug or electrical system and if the problem continues with your heater, contact your authorized dealer. | |
| CEr | Processor overtemperature error |
| 1. When you see the CEr error code, turn off the heater and allow it to cool. | |
| 2. If it gives the same error when you operate it again, contact your authorized dealer. | |
Solaris Professional Convector Display Codes
| SLEP | Motion detection active |
| 0PEn | Open window detection |
| AnFr | Anti-freeze is working |
| xx 0n | xx hr time-delay turning on active |
| xx 0F | xx hr time-delay turning off active |
| 0FF | heater is turned off |
| 0FFA | heater is turned off /anti-freeze property is on |
| L0 | Child lock enabled |
| UnL0 | Child lock disabled |
| C0dE | test mode alarm or entry to Exclusive Keylocker presentation mode alarm |
| CC0d | Entry to Exclusive Keylocker deleting mode alarm |
| CLr | Restore factory settings |
| CntC | Entry to Ntc (ambient temperature) calibration mode alarm |
| CLdr | Entry to Ldr calibration mode alarm |
| PtyP | Program Settings (daily/weekly) |
| tSEt | Setting Time and Day |
| hSEt | Weekly Program Setting |
| ASEt | Adaptive Start Parameters |
| uEr | oftware Version Monitoring |
